Connect your router to a wifi repeater in minutes
Connecting a router to a wifi repeater may seem like a complicated technical task, but it is an excellent way to expand the coverage of your Internet connection without the need to invest in additional equipment. In addition, it is a practical solution for those spaces where the wifi signal is weak or non-existent. Here’s how to set up your router as a wifi repeater in a simple and effective way.
Whether you have an old router at home or you are thinking of getting a wifi repeater, this article will guide you through the fundamental steps for a secure and effective connection. Follow these tips and improve your signal today.
Steps to use a router as a wireless repeater
The possibility of turning a router into a wireless wifi repeater is a very attractive option for many users. This is because it allows the extension of the wifi network in a simple way. Here’s how to do it:
- Verify that your current router supports the repeater or bridge mode function.
- Access the router’s configuration through its IP address and look for the wireless configuration section.
- Select the repeater mode and find the network you want to connect to.
- Enter the password for the main network and save the changes.
Once configured, place your router in an optimal location so that it can receive the signal from the main router and relay it properly.
TP-Link wifi repeater setup guide
TP-Link brand wifi repeaters are widely recognized for their ease of configuration and reliability. Here’s how to connect a router to a TP-Link wifi repeater:
First, make sure you have the access data for the network you want to amplify on hand. Then follow these steps:
- Connect the repeater to a power outlet and wait for it to start up.
- Connect to the repeater network from your device.
- Open the browser and type the IP address of the repeater (usually provided in the manual).
- Enter the administrator credentials and follow the setup wizard.
- Select the network to extend and enter the corresponding password.
With these steps, you will have your TP-Link repeater ready to improve your wifi network coverage.
How to use TP-Link router as a wireless repeater
If you are interested in configuring a TP-Link router as a repeater, it is important to know that the process is quite similar to configuring a dedicated repeater of the same brand. Here are the steps to follow:
Access the router’s administration interface and look for the operating mode section. Change the settings to repeater mode and select the network you want to connect to. Enter the password and save the changes. Once done, your TP-Link router will work as a wireless repeater.
Configure your wifi repeater with your cell phone
The configuration of a wifi repeater does not have to be done only through a computer. You can configure it easily from your cell phone. Most modern repeaters have dedicated apps that guide you step by step. Simply download the corresponding application, follow the instructions and in a few minutes you will have your repeater up and running.
Connecting your router as a repeater with an ethernet cable
Although the idea of a repeater is to operate wirelessly, connecting your router as a repeater with an Ethernet cable can ensure a more stable and reliable signal. To do this, connect the secondary router to the primary router using an Ethernet cable. Then, access the secondary router’s settings and set it to bridge or repeater mode. This will allow the router to extend the wifi signal more efficiently.
Wifi repeater wired connection: How to do it?
Connecting a wifi repeater by cable may be the best option when stability is required and you have the possibility to perform a physical installation. Connect the repeater to your router using an Ethernet cable and perform the configuration via the device’s web interface. This will ensure a secure and reliable connection.
Related questions on how to maximize your wifi network
How to connect a wifi repeater to the router?
To connect a wifi repeater to the router, it is essential to place it close to the router during the initial configuration. This ensures the best possible signal. Then, proceed to configure it using an Ethernet cable or, if the device allows it, wirelessly following the manufacturer’s instructions.
How do I know if my router is compatible with a repeater?
The compatibility of your router with a repeater will depend on the wireless connection standards they both support. It is crucial that you check the technical specifications and make sure that both devices work under the same standard, such as 802.11n or 802.11ac, to ensure a successful connection.
How to connect a repeater without WPS to a router?
If the repeater does not have WPS, manual configuration will be your option. Connect the repeater to a power source and to your computer using an Ethernet cable. Then, access the management interface via the repeater’s IP address and follow the configuration process to link it to the network you wish to extend.
What if I use a router as a repeater?
Using a router as a repeater is an excellent way to expand the coverage of your wifi network without additional costs. However, you may notice a decrease in connection speed due to signal retransmission. Make sure that the router’s firmware is compatible and that the security and channel settings are properly configured.
To complement this guide, we invite you to watch the following video that explains in a practical way how to configure your old router as a wifi repeater:
By following these steps and recommendations, you will be able to enjoy a much more stable and extensive Internet connection in your home or workplace. Remember that a good initial configuration is key to the success of this operation.